The FULL Trail-Gear Inc. Range…

Available in Australia at Yuri^® 4x4

Email or phone us on 07 4637 8543 or 0427 640 502 today for prices and availability.

High Steer Kits

Includes the SUPER DUTY "SIX SHOOTER" 6-Bolt Toyota Knuckles and Arms.

Over a year in development and testing, this new knuckle design sets a new standard in Toyota knuckle strength and reliability. This kit totally eliminates the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose and shearing off the studs. The knuckle housing is also thicker than stock and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC machined, each knuckle is direct bolt on, heavy duty replacement.

Six Shooter Knuckles™ are sold as a pair and include special 6 hole shims for use between the top of the knuckle and the steering arm. Also included is a 1/2" coarse thread bolt to help remove the steering arms for knuckle service. To remove the steering arms, remove all 6 nuts, then install the bolt in the top of the arm. As the bolt is tightened, the steering arm is pulled up off the knuckle. Stock lower bearing plates and shims from your old knuckles are needed for knuckle assembly. A minimum of four additional steering arm studs are needed for installation. No questions asked, lifetime warranty on all knuckles, arms, rod ends and rods.

This six stud high steer kit includes left and right six stud steering arms, tie rod, drag link, four rod ends and your choice of flat or curved pitman arm. "Six Shooter Knuckles" are perfect for Full Hydro set-ups on comp rigs. To use this kit, you will need four additional knuckle studs & hardware.

High Steer Crossover Steering (Right Hand Drive)

Crossover Steering is critical for rock crawling. The stock steering just can't keep pace with today's super flexible suspension systems. This results in broken stock steering arms and loss of steering. Our high steer kit features unbeatable quality at a super low price.

Kit features super beefy, solid forged steering arms, heavy duty pitman arm, heavy duty .250 wall steering rods, and rod ends. Precision fit for easy assembly. Flat steering arm kit requires custom mounting hardware, not included in kit.

High Steer Arms (Right Hand Drive)

Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure Forged from 8620 tool steel, these arms are incredibly strong.

All mounting surfaces are machined including the split washer surface and the tie rod tapered holes, ensuring correct and positive contact between parts, preventing knuckle studs and tie rod ends from coming loose. Arms are angle compensated so that the rod ends ride at the factory designed 90 degree angle. Fits 1979 - 1985 Toyota Hilux and 4Runner. Also fits 1979 and later Land Cruisers with spring over conversion.

Enquire today for pricing and availability.

Suspension Kits

IFS Eliminator Kit

Our IFS Eliminator kits include a front diff armour plate, upper axle gusset wheel bearing and knuckle service kits. Items most others charge extra for. To install your solid axle kit your going to need a rear matching lift kit, solid front axle from a 79-85 Hilux or 4Runner, and a long spline drive shaft.

We offer our kits in three different heights. The hangers and shackles included with each kit add one inch of lift. Thus our 3" spring kit has 4" lift and our 4" kit would be 5" of lift.

Note: On V6 installations, we recommend moving the front hanger forward 3/4". This allows the tie rod to clear the stock 4wd oil pan. It also kicks the shackles forward slightly helping the springs to carry the heavier load of the V6 motor.

Now our front 5" springs are available in a heavy duty version with a 25% higher spring rate. We have added a 7th leaf and readjusted the length of the leaves to match. If you are running a larger v6 or v8 motor you will appreciate the extra weight carrying capacity of these springs. These new springs can be supplied with your kit at no additional charge. Just ask about the 5" Heavy Duty option when you order.

All Products are supplied with Installation Instructions.

Creeper Locks™ Aluminium Beadlocked Wheels

What are Creeper Locks? Creeper Locks are Trail-Gear's very own, super strong, heavy duty wheels. These wheels look great and come at an affordable Trail-Gear price! Creeper Locks are 17" X 9" wheels with a backspacing of 3.75" and are made from a solid piece of aluminum. Each wheel weighs a whopping 45lbs with locking ring and hardware.

These are no ordinary aluminium wheel, Creeper Locks are super tough and built to last. Each wheel is cast with the inner beadlock as part of the wheel. All 24 of the bolt holes on the wheel have steel Time-Serts installed to prevent the bolts from galling. Drop down inner lip centers tire on to wheel during mounting.

Features:

• Solid Heavy Duty Design
• 17" Wheels, 9" Wide
• 3.75" Back Spacing
• 24, Grade 8 5/16" bolts
• Time-Sert Inserts Installed
• Wheel Rating 2800 lbs Each

Toyota Aluminium Wheel Spacers

These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one.

Great for use on solid axles conversions to make the front axle similar in width the wider rear axle found on 86 and up Toyota trucks.

Bolt pattern is 6 stud on a 5.5" round circle. Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminium. Grade 8 Studs, Grade 10.9 nuts.

Five sizes available. Shipped as a set of 2 spacers w/nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Hilux, and Cruisers.

Ask us about these Wheel Spacers, or, enquire about wheel spacers for other vehicle Models.

Trail Armor

Weld-On Differential Armor - Large

Here In addition to our small style ring gear protector above we also have this larger style for those that prefer something a little larger to protect their 3rd member. Armor welds in place.

Includes two 10mm style drain plugs. Fits front or rear 79-95 8" Toyota solid axle housings. Unpainted finish.

Also Available:

• Trailer D-Ring, Weld On, 5/8"
• Shackle D-Ring, 3/4"
• Weld-On Differential Armor - Small
• Upper Axle Gusset
• Rock Sliders

Enquire today for pricing and availability.

Transfer Case Products

Installing a set of low range transfer case gears along with adding a second reduction box gives your Pickup or 4Runner 20 forward gears and 4 reverse gear options. Stock low range, double low or all the down to 10.7 to one. With this set-up you'll have just the right gear, no matter what the terrain.

Trail-Creeper™ Dual Transfer Case Adapter

Installation requires an additional top shifting Toyota gear-driven transfer case, drive shaft modifications, and floorboard modifications. Assembled dual adapter unit is 6.5" long. Shipping weight 14 lbs.

Kit Includes:

• Heavy duty aluminium adapter plate
• Heavy duty coupler
• Cage & main bearings installed
• Replacement transmission output seal
• Magnetic drain plug
• Shift knob
• Mounting hardware
• Transfer case and transmission block off plates

Why buy Trail-Gear Dual Adapter?

• High quality materials
• Precision fitting coupler for long life
• Factory Toyota gasket set
• Lifetime warranty

Enquire today for pricing and availability.

Trail-Creeper™ 4.70 T-Case Reduction Gear Kit

For rock crawling, lower transfer case gears give you the control you need to keep your truck on track. This is an affordable 4.70:1 gear kit for your gear driven Toyota transfer case.

Trail-Creeper T-Case gears are available in 21 and 23 spline configurations. Kits include replacement gears, gaskets and seals. Disassembly and modification of transfer case is required for installation. Input gears are precision ground & micro-polished to guarantee the removal of all surface imperfections in the forging.

Trail-Creeper gears fit Toyota 4WD Hilux and 4Runners from 1979-1995 with gear drive style transfer cases. Gear sets reduce the stock low range from 2.28 to 4.70, nearly twice the the reduction of the stock gears. High range is not affected and remains 1 to 1. Each gear set carries a full lifetime guarantee. If your gears ever fail to function properly, simply return them to us for replacement.

Why buy Trail-Gear 4.70 gears?

• High Quality Materials
• Precision fitting spline fit for long life
• Factory Toyota Gaskets Set
• Lifetime Warranty

If you are looking for a product and can't find it on our web site, chances are, we can source it, or build it for you at a good price.

Enquire today for pricing and availability.